. PLAYTREK CUSTOM FIGURES
Last Update: 10/11/99

 
Safety
Boil & Pop
Painting
Adding Features
Removing Features
Sculpting
Molds & Resins
Glue & Adhesives
Recipes
Stages
Custom Links

Want to submit a tip or recipe?

Email submissions to:
customs@bountyhuntertoys.com

______ DATA from INSURRECTION

PARTS NEEDED:
9" data 
9" Environmental Suit 

HOW TO:
1) I removed all the color lines and pockets from the environmental suit.
2 ) I removed 1/4 of an inch from the bottom of the helmet using the dremel.
3) I sanded the circles on each side of the helmet with the dremel. 
4) I added three lines of Crayola magic to the top of the helmet to form the ridges. I used water to wet the tip of my finger to smooth the ridges.
5) For cloth between the helmet and the body, I used  a rectangular piece of white cloth, I fold it the bottom part and sewed in a piece of tie clip that comes with your regular trash bags.
6) I used glue to attach the cloth to the bottom of the helmet.  It looks like a long helmet, but I need it extra material to form the fold ridges underneath the helmet. The tie clip provide the circular support around the body.
7) I painted the helmet separately, covering the front with scotch tape.
8) the boots were done by using the Model Magic compound. I cut the bottom part of the suit to prevent the bulking on the boots. Just by using water I was able to smooth the boot around his feet.
9) after the boots dried, I painted the entire suit 4 times. one day in between each coat of paint.
10) put the helmet on and I was finished.

FINAL PRODUCT:

*Insurrection Data  recipe provided by Gerardo Nevarez